Neoperl Water Saving Products

In line with the increase of population in the world, the demand for water increases every day, the result of climate changes is effective in many regions. The protection of the water was now much more important and critical Tags. Several countries have crossed action to implement different water protection and water saving measures, such as limiting flow rates on plumbing fixtures.

in the United States ”ASME Standard A112.18.1 M” has set up maximum flow rates for taps and showers. General definitions of the flow rates of the installation faucets with EN 246 Standards in Europe. The Australian Government has launched the WELS program with “Water Efficiency Classification and Standards”.

Neoperl contributes to the protection of the water, which is the number one source by shaping, controlling and maintaining water quality. Neoperl’s creative and smart technical solutions, the meeting of high performance Ticona plastic materials brings significant contribution and convenience to reduce water consumption. Flow regulators applied to home, sink and shower fixtures provide a economy that reaches 70% without feeling any comfort loss.

]

In addition to these products being economical, strong and fine networking structures have high strength properties of standard household cleaning products with excellent blends of air in the anafor effect, corrosive and mulching effects, pollution caused by bacteria and lime.

The part is aerator that determines all the performance of a tap. A actuator consists of shirt (housing), cartridge (inhard) and seal. Aerator,
]
• Controls the smoothness and diameter of the flow,
• Reduces water splash and plumbing voice,[
• Saves water and reduces energy spending,[
• Provides optimal performance according to the press,
• Meets the norm and standards of international installation.

]

[

The linear smoothness of the flow is taken into account the diameter, splash limits and flow performance while the flow quality is evaluated. However, a certain comfort and satisfaction should be met. Pressure loss is possible with Neoperl, which is possible to consume the desired amount of water without experiencing.

Standard actuators are also increasing as the amount of flow increases as pressure multiply. Neoperl PCA (Pressure Balancing) technology does not allow it. Allows water to distribute in equal quantities as well as water saving. Features, structure and dimensions carefully selected “dynamic elastomer O-ring” pressure, combined with water channels to reduce water passage by applying pressure to the seat slot, allowing to switch by loosening if pressure is reduced. [

]In this case the amount of constant water flow, which is not affected by pressure fluctuations. A few taps are not felt at the same time.

Position 1: (0 bar)[[
Position 2: (3 bar)[
Position 3: (5 bar)

]Bathroom is fully open to the wash basin or kitchen house and consumed water from 15 to 22 liters per minute in normal pressure values. If the pressure is higher than normal values, this amount is increased much, otherwise it has been reduced Tags. This amount with flow trimmer cartridges is possible to reduce 3 liters, 5 liters or 7 liters per minute. Thus, water saving is provided at 65%-85 rates.

5 liters per minute for bath wash basin taps, flow regulators are ideal for 7 liters of water flow per minute for kitchen faucets. 3 liter spray flow cartridges are enough for taps in public areas. (Each product is coded in different colors according to flow quantities.

The average amount of 20-30 liters of water per minute. In the same way, it is possible to reduce this amount to 9 liters or 12 liters per minute without any loss of comfort with shower flow control regulators. Thus, saving water at 50% -70 rates.

Products are high resistance to clogging and decaling. Special design body is absolutely crushed and not broken. Besides international quality certificates, all products have test reports.

The EU countries who have worked seriously about 20% reduction of the release of gases that create greenhouse effect by the requirement of the Kyoto Protocol, have given importance to saving energy needed for hot water production. It is necessary to have a minimum level of comfort loss in order to apply hot water saving with success. PCA (pressure balancing) provided water saving cartridges with flow control, they successfully met this task Tags. The amount of energy required to reach 1m3 water to 37C is 30 kW hours. According to calculations, the release of CO2 gas, which causes global warming with the use of products mentioned in Germany, and creates greenhouse gas effect, will decrease 5 Million tons per year. [

On the other hand, it should be noted that the water is needed for transportation from the well, from the pond or from the shelter to the ultimate usage area. Another energy demand arises in the handling and purification of waste water again. In short, water-saving chain brings a number of savings.

Negative conditions caused by air and environmental pollution in agriculture and livestock, pumpj, sack machine and equipment operation, maintenance and repair expenses, man/hour costs etc.. The size of the saving is expanding beyond the estimates when taken into account in other sub factors.

A serious and big effect is achieved with a small investment. If you need to give an example; in a settlement where 1000 people live, each person is considered to wash only 1 minute in the day; 1000 minutes x 15 litres (Musluks are fully open and 1 to 5 bar pressure range, with average 15 to 22 lt/min water consumed) = at least 15,000 ] water is spent. This amount with water saving cartridges (3 liters/min. When the flow is preferred) 1000 minutes x 3 lt = ] [3,000], meaning a savings of 80%.

The ease of installation, extremely economical investment amount is met with the savings obtained within a few months.